At the end of the year I feel expired

I am just trying to make a catchy title for this roll of Fuji Neopan 400 that expired in May 2014 and that I processed in Caffenol Delta. I very rarely shoot film that is so expired, that roll was entrusted to me by young fellow film photographer Brian Teo a few weeks back.

I shot the roll with the Leica IIIc and mostly the Elmar 50mm F3.5, but a couple of shots were also done with the Voigtlander Color Skopar 21mmF4. I processed the film with my Caffenol Delta recipe adjusted for 500 ml.

The recipe consist of 500 ML of water to use :

  • 16 g of Arm and Hammer washing soda
  • 10 g of pure Vitamin C
  • 20 g of Nescafe Classic

At my average 28 Degree Celsius I process for 4’40”, 20 seconds inversion and then 3 inversions every minute.

I fixed with my first mix of Ilford Rapid Fixer for 11 minutes, this is my 18th film fixed with this batch, I’ll mix some new one next week. I don’t use a stop bath and use Ilford method for rinsing the developer and the fixer.

The result is quite grainy, which I blame on the age of the film. The film was also very clean, not much dust cloning was required. I think this is going to be my last roll processed in Caffenol this year, but I still hope to shoot a bit more before Friday.

The shot really shows my usual subjects when walking around Singapore : mostly passing strangers. I have added a couple more themes this time:

I stumble across a couple of weddings, actually only two shots turned out ok, but I met two other couples these last weeks.

I also made a short trip to Coney Island on the north shore. This popular leisure spot is also a good photo opportunity.

More random stranger below

Finally a bit of news

Santa was here
Lliang Court mall is dressed to go down
Robinsons shops are closing.

I hope everybody will have a great end of the year. See you in 2021, until then keep om shooting

At the end of the year I feel expired

Misadventure in Caffenol – take 2

If you read the last post, you have heard of my issues with Caffenol here is Singapore; the pictures below are taken what I refer to as  film number 3. This is a Fuji Neopan 100  which is supposed to be Caffenol friendly. I shot the film (only 12 shots in Medium Format) in Chinatown one afternoon with the old Agfa Isolette III. Film goes out very dark, but when digitized with the DSLR method, pictures are ok; unfortunately the focusing of the Agfa does not works. The lens was stuck a few years back and I disassembled and cleaned it but could not set the focus properly. There are 3 cool shots however.

Ice Man (1)
Ice Man (1)

Ice Man (2)
Ice Man (2)

Chinese Medical Hall
Chinese Medical Hall

The pictures could not be scanned with the Epson v500, I had to use my DSLR with a 50 mm lens and an old flashgun as a back light to digitize them; that is not improving the result of course.

Misadventure in Caffenol – take 2

The German- Soviet Pact (In photography term)

I can never resist doing something foolish, so after having owned the Zorki for a few weeks, I googled a bit and flickered a lot and ordered an adapter to put the Industar 22 lens on the Leica M4.

Leica introduced the M mount in 1954, before this time the M39 (LRM or screw mount) was the norm with some variations on the on the thread. Since 1954 it is possible to mount older LTM lenses on M bodies using adapters. Adapters have 3 functions:

  • allow mounting the LTM lens on the M body (the reverse is not possible)
  • enable the usage of the view finder for focusing
  • trigger the display of the correct frame lines in the M viewfinder. This means you need several adapters if you have several different lenses.
  • I found a very cheap adapter on Ebay (8 $ including port) and could attach the Industar on the M4. Hurrah ! I managed to replace a 50mm Summilux F1.4 genuine Leica lens that costs a 1000 bucks by a Industar F3,5 russian lens probably older that costs me 50 dollars at most. The 3 functions above work very well : the rangefinder displays the proper distance, the 50mm frame is shown on the viewfinder and needless to say that the lens is attached.

    I loaded a roll of Fuji Neopan 400ASA, so I can shoot at smaller apertures; we never know and a after a couple of days of waiting I got the results from the lab.


    Walking to the office, I came across this guy painting a very nice mural that can be found on my Flickr. I made a couple of shots at F3.5 and 1/30s; probably the Summilux would have come more handy.


    This lens has a terrible flare; I cannot see any special damage to my sample, so probably it’s a factory defect. I applied a bit of dodging in Lightroom to fix that one. I think the picture has a nice “old time” effect to it.


    This one is my favorite; nothing to add, I just like it.

    So all in all, that works, it’s good fun for 8$, plus the lens is very nice to focus but the aperture is a real pain to set. If you add the fact that the M4 has no internal meter it’s not so easy to take a pic. Or you have to play it but ear; very old style.

    But that’s not the end of the story. During a late Sunday night at home I ordered on Ebay (where else) a Canon LTM lens, a 135MM F4, called Serenar, for 60 USD including shipping. I also got the correct 135mm adapter. This one was a different ballgame:

  • It is not mounting on the Zorki because the thread is different, so it does not lock, plus it may get stuck with the Zorki Rangefinder prong.
  • And it does not couple with the M4 rangefinder prong. Basically once attached the M4 prong is at 12 o’clock and the lens one at 11AM: no rangefinder coupling. Ok I said I can use the guessometer, this useful tool I used for the Zorki, but damn the bloody lens distance scale is in imperial measurements!

    To be short there will be some DIY sooner or later, but however I made a few shots sitting at the terrasse of a Cafe and here is a sample below. Not mind blowing but that works.

    I think I like the 135mm.

  • The German- Soviet Pact (In photography term)